0

Hydrostatic Sensor Paver

Hydrostatic Sensor Paver
Hydrostatic Sensor Paver
Price And Quantity
  • 1
  • Unit/Units,
  • 48000.00 - 95000.00 USD ($)
  • 94,600 USD ($)
    Product Specifications
    • Pavers
    • Laying suitability: Bituminous, Wet mix, GSB, DLC,DBM material
    • Laying Capacity: 300 TPH Ton/day
    • Automatic
    • 33.33 Hertz (HZ)
    • 14100 Kilograms (kg)
      Product Description

      With the help of our professionals, we have been able to offer our customers a qualitative range of Hydrostatic Sensor Paver Finisher Machine which is manufactured according to set industry parameters. The offered product is widely used for mixing paving materials using operational controls on highways, parking lots, streets, and many other places. Under the direction of vigilant professionals, this machine is manufactured using quality assured components and modern techniques at our premises. We provide this Hydrostatic Sensor Paver Finisher Machine to the customers at budget friendly rates within a stipulated time frame. It is completely suitable to be used with bituminous material, DBM, and wet mix with same working consistency.


      Technical Specification of Hydrostatic Sensor Paver Finisher Machine


      Power Unit

      Engine

      Kirloskar Make Water-Cooled Electric Start Diesel Engine, Model 6r 1080 Ta1, 125 Hp (93 Kw) @ 2200 Rpm Or Equivalent

      Electrical System

      12 V Dc

      Emission Standard

      Bs-Iii

      Speed Reduction Gearbox

      Two Speed Reduction Gearbox To Achieve Low Speed For Paving And High Speed For Traveling.

      Performance

      Laying suitability Option 1: Bituminous material
      Option 2: Bituminous, Wet mix, GSB, DLC,DBM material (Dual Purpose)


      Laying Capacity 300 TPH


      Laying Thickness 300 mm (Max) to 10 mm (Min)
      12″ (Max) to 3/8″ (Min)


      Transmission Hydrostatic


      Working Speed 0 to 30 m/min (Max.)


      Travelling Speed 0 to 16 km/hr (Max)


      Weight 14,100 kg (31,200 lb) approx.


      Slope & Grade Control MOBA, Germany make electronic sensor
      (Auto & Manual mode available)


      Maintenance Shutters On three side of machine


      Traction & Conveyor Pump – Motor Sauer Danfoss, Germany or equivalent

      SCREED

      Screed width 2.5 m (8′ 2½”) basic width, Hydraulically extendable up to 4.5 m (14′ 91/8″), bolt on extension up to 5.5 m (18′ ½”)
      Option: Attachment up to 6.0m (19′ 8¼”)


      Crown (Manual) -1° / +4°


      Screed Heating Yes, with 8 LPG burner facility


      Screed Vibration Yes, infinitely variable (0 to 50.00 Hz )


      Screed Tamping Yes, infinitely variable ( 0 to 33.33 Hz )

       Under Carriage

      Rear Wheel Four no. Pneumatic Tyre
      Size: 10.00 x 20


      Front Wheel Four no. Solid Rubber Tyre
      550 Dia. x 175 mm wide

      REFILL CAPACITIES  

      Fuel 156 L (34.4 gal)


      Hydraulic Oil 282 L (62.1 gal)


      Cooling System 6.5 L (1.4 gal)


      Engine Oil 14 L (3.0 gal)

      OPERATOR STATION

      Control Panel Type Sliding


      Operator Seat Double Operator Seat


      Travelling Function Left & Right side


      Operating Function Left & Right side


      Steering Hydraulic


      Brake Caliper disc brake on both the sides

      CONVEYOR & AUGER SYSTEM

      Conveyor & Auger 2 Sets, one on each side


      Conveyor Drive Hydraulic


      Conveyor Control On / off switch function


      Auger Screw Size Dia 300 mm (12″)


      Auger Material Ni-Hard / High Chromium Steel Material

      HOPPER & FEEDING SYSTEM

      Hopper Operation Hydraulic


      Hopper Capacity 4.25 m3 (151 ft3)


      Hopper Width Working: 3.22 m (10′ 6 3⁄4″)
      Closed:    2.44 m (8′)


      Feed Tunnel Width 1.268 m (4′ 1 5⁄8″ )

      DIMENSIONS

      Operating Height 3.47 m (11′ 4 5⁄8″)


      Shipping Height (canopy tilted) 2.90 m (9′ 6 1⁄4″)


      (w/o canopy & exhaust) 2.68 m (8′ 9 1⁄2″)


      Shipping Width 2.57 m (8′ 5 1⁄4″)


      Length (Tractor unit + screed) 6.67 m (21′ 10 1⁄2″)


      Wheel Base 2.61 m (8′ 6 7⁄8″)


      Dump Height 0.70 m (2′ 3 1⁄2″)


      Thrust Roller Height 0.54 m (1′ 9 1⁄4″)

      MACHINERY ACCESSORIES

      Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn

      OTHER FEATURES

      All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).




      Trade Information
      • 4 Per Month
      • 6 Week
      • Canvas Canopy, Working & Traveling Lights,Tool Kit with Jack,Horn
      • Mizoram, Madhya Pradesh, Gujarat, Sikkim, Maharashtra, Tripura, Daman and Diu, Haryana, Manipur, Uttarakhand, Kerala, West India, Uttar Pradesh, North India, Jammu and Kashmir, Andaman and Nicobar Islands, Assam, Rajasthan, Himachal Pradesh, Karnataka, Central India, Jharkhand, East India, Meghalaya, Odisha, Bihar, Chandigarh, Tamil Nadu, Delhi, South India, West Bengal, Pondicherry, Arunachal Pradesh, Goa, Andhra Pradesh, Chhattisgarh, Telangana, Punjab, Lakshadweep, Nagaland, Dadra and Nagar Haveli, All India
      • ARAI (Automotive Research Association of India)
      Contact Us

      Plot No.-79, Sub Plot D, Opp. Aabad Bakery, Near Water Tank, Phase- 1, GIDC Vatva, Opp. Abad Bakery, Ahmedabad, Gujarat, 382445, India
      Phone :+918068094888