0

Hydrostatic Sensor Paver Finisher Model VP-05

Hydrostatic Sensor Paver Finisher Model VP-05
Hydrostatic Sensor Paver Finisher Model VP-05
Price And Quantity
  • 1
  • Unit/Units
  • 94,600USD
  • 48000.00-
    Product Specifications
    • Pavers
    • Laying suitability: Bituminous, Wet mix, GSB, DLC,DBM material
    • Laying Capacity: 300 TPH m3/hr
    • Automatic
    • 50 Hertz (HZ)
    • 125 hp @ 2300 rpm Statampere (sA)
    • 14100 Kilograms (kg)
    Product Description

    Hydrostatic sensor paver finisher best in its class of wheel mounted paver finishers with electronic sensor for grade and slope control giving accurate level of laid surface and quality output. It is suitable for laying bituminous, wet mix, GSB, DLC, DBM material.

    UNITER Sensor Paver Finisher Machine: Model no. VP-05

    • Material Laying Capacity: 300 TPH
    • Engine Power: 125 hp
    • Screed size: 2.5m to 5.5m
    • Wheels on rear axle: Two on each side
    • Electronic Sensor: MOBA, Germany
    • Operator Seat: Double
    • Work Applicability
    • Option 1: Bituminous material
    • Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)

    Technical Specification

    Power Unit

    Engine

    Kirloskar make water-cooled electric start diesel engine, Model 6R 1080 TA1, 125 hp (93 kW) @ 2200 rpm or equivalent

    Electrical System

    12 V DC

    Emission Standard

    BS-III

    Speed Reduction Gearbox

    Two speed reduction gearbox to achieve low speed for paving and high speed for traveling.

    Performance

    Laying suitability

    Option 1: Bituminous material

    Option 2: Bituminous, Wet mix, GSB, DLC,DBM material (Dual Purpose)

    Laying Capacity

    300 TPH

    Laying Thickness

    300 mm (Max) to 10 mm (Min)

    12″ (Max) to 3/8″ (Min)

    Transmission

    Hydrostatic

    Working Speed

    0 to 30 m/min (Max.)

    Travelling Speed

    0 to 16 km/hr (Max)

    Weight

    14,100 kg (31,200 lb) approx.

    Slope & Grade Control

    MOBA, Germany make electronic sensor

    (Auto & Manual mode available)

    Maintenance Shutters

    On three side of machine

    Traction & Conveyor Pump – Motor

    Sauer Danfoss, Germany or equivalent

    Screed

    Screed width

    2.5 m (8′ 2½”) basic width, Hydraulically extendable up to 4.5 m (14′ 91/8″), bolt on extension up to 5.5 m (18′ ½”)

    Option: Attachment up to 6.0m (19′ 8¼”)

    Crown (Manual)

    -1° / +4°

    Screed Heating

    Yes, with 8 LPG burner facility

    Screed Vibration

    Yes, infinitely variable (0 to 50.00 Hz )

    Screed Tamping

    Yes, infinitely variable ( 0 to 33.33 Hz )

    Under Carriage

    Rear Wheel

    Four no. Pneumatic Tyre

    Size: 10.00 x 20

    Front Wheel

    Four no. Solid Rubber Tyre

    550 Dia. x 175 mm wide

    Refill Capacities

    Fuel

    156 L (34.4 gal)

    Hydraulic Oil

    282 L (62.1 gal)

    Cooling System

    6.5 L (1.4 gal)

    Engine Oil

    14 L (3.0 gal)

    Operator Station

    Control Panel Type

    Sliding

    Operator Seat

    Double Operator Seat

    Travelling Function

    Left & Right side

    Operating Function

    Left & Right side

    Steering

    Hydraulic

    Brake

    Caliper disc brake on both the sides

    Conveyor & Auger System

    Conveyor & Auger

    2 Sets, one on each side

    Conveyor Drive

    Hydraulic

    Conveyor Control

    On / off switch function

    Auger Screw Size

    Dia 300 mm (12″)

    Auger Material

    Ni-Hard / High Chromium Steel Material

    Hopper & Feeding System

    Hopper Operation

    Hydraulic

    Hopper Capacity

    4.25 m3 (151 ft3)

    Hopper Width

    Working: 3.22 m (10′ 6 3⁄4″)

    Closed:    2.44 m (8′)

    Feed Tunnel Width

    1.268 m (4′ 1 5⁄8″ )

    Dimensions

    Operating Height

    3.47 m (11′ 4 5⁄8″)

    Shipping Height (canopy tilted)

    2.90 m (9′ 6 1⁄4″)

    (w/o canopy & exhaust)

    2.68 m (8′ 9 1⁄2″)

    Shipping Width

    2.57 m (8′ 5 1⁄4″)

    Length (Tractor unit + screed)

    6.67 m (21′ 10 1⁄2″)

    Wheel Base

    2.61 m (8′ 6 7⁄8″)

    Dump Height

    0.70 m (2′ 3 1⁄2″)

    Thrust Roller Height

    0.54 m (1′ 9 1⁄4″)

    Trade Information
    • 4 Per Month
    • 6 Week
    • Canvas Canopy, Working & Traveling Lights,Tool Kit with Jack,Horn
    • All India
    • ARAI (Automotive Research Association of India)
    Contact Us

    Plot No. 79, Sub Plot 'D', Opp. Aabad Bakery, Near New Water Tank, Phase -1, GIDC Vatva Ahmedabad Gujarat India +918037303656
    Phone :+918037303656